Wharfedale Pro DM 4.0 Series Micophones

The DM4.0 is a dynamic moving coil microphone designed to handle a wide variety of vocal and instrument applications for both live sound and recording. This microphone is also available with an integral on/off switch (model DM4.0S). Characteristics of the DM4.0, such as a tight super-cardioid pickup pattern with a frequency response of 45Hz - 18kHz, slight bass proximity and mid range presence result in a warm and natural sounding response for every application. The DM4.0 is engineered to handle very high source levels without distortion and provides over 36dB of off axis feedback rejection. Low impedance and balanced output allow for interference free performance. The DM4.0 is built solidly with a cast alloy body, steel mesh grille ball and internal pop screen. The DM4.0 and DM4.0S are available either as a single mic, or as a pack of three microphones. The single pack contains one microphone with stand adaptor as well as a 4.5 meter XLR-XLR cable. The pack of microphones is supplied in a hard wearing carry case and contains three microphones with stand adaptors and screws. APPLICATIONS: Live Stage Clubs Houses of Worship Corporate Presentations Karaoke Instruments Electric guitar amplifiers drums, horns, percussion Home Studio All vocal and instrument applications

SPECIFICATIONS

MODEL DM-4.0 FREQUENCY RESPONSE 45Hz-18KHz WEIGHT 330grams OUTPUT IMPEDANCE 250ohms TRANSDUCER TYPE Dynamic POLAR PATTERN Super-cardioid SENSITIVITY -53dB (0dB=1V/Pa) OFF AXIS REJECTION >25dB at125 degree MAXIMUM SPL >136dB CABLE/CONNECTOR 3 pin gold plated male XLR POLARITY Positive voltage on pin 2 relative to pin 3 of output XLR connector HOUSING Zinc alloy ON/OFF SWITCH DM4.0S

**Contact me for best price quote**

Wharfedale Pro DM 3.0 Series Micophones

The DM3.0 is a dynamic moving coil microphone designed to handle a wide variety of vocal and instrument applications for both live sound and recording. This microphone is also available with an integral on/off switch (DM3.0S). The wide super cardioid polar pattern minimizes feedback problems and effectively rejects signals not originating directly in front of the mic capsule, resulting in a warm and natural response for nearly every type of voice. The DM3.0 and DM 3.0S are engineered to handle very high levels of gain without distortion and will provide over 20dB of off axis feedback rejection. Low impedance and balanced output allow interference free performance even with long cable runs. The DM3.0 & DM3.0S are built with a solid cast zinc alloy body, steel mesh grille ball and internal pop screen. The special shock mounting allows movement of the mic element and greatly reduces any handling noise. The DM3.0 and DM3.0S are available either as a single mic, or as a pack of three microphones. The single pack contains one microphone with stand adaptor as well as a 4.5meter XLR-XLR cable. The pack of microphones is supplied in a hard wearing carry case and contains three microphones with stand adaptors and screws.

SPECIFICATIONS

MODEL DM-3.0 FREQUENCY RESPONSE 50Hz -18KHz WEIGHT 300grams OUTPUT IMPEDANCE 250ohms TRANSDUCER TYPE Dynamic POLAR PATTERN Supercardioid SENSITIVITY -54db (OdB=1V/Pa) OFF AXIS REJECTION >25dB at125 degree MAXIMUM SPL >135dB CABLE/CONNECTOR 3 pin gold plated POLARITY Positive voltage on pin 2 relative to pin 3 of output XLR connector HOUSING Zinc alloy ON/OFF SWITCH DM3.0S **Contact me for best price quote**